How do I adjust my hunter prs40

The radius, or distance the water sprays on Hunter Nozzles can be adjusted by turning the center screw on top of the nozzle. This will increase or decrease the radius. All nozzles come from the factory in the fully open position (fully counterclockwise position).

How do you adjust Hunter spray nozzles?

The radius, or distance the water sprays on Hunter Nozzles can be adjusted by turning the center screw on top of the nozzle. This will increase or decrease the radius. All nozzles come from the factory in the fully open position (fully counterclockwise position).

How do you adjust Hunter 1/20 sprinkler heads?

Insert the plastic end of the Hunter adjustment wrench into the arc adjustment socket. While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full 360 degree rotation of the wrench will increase the arc 90 degrees. You can adjust the arc anywhere in between 50 degrees and 360 degrees.

How do you adjust a hunter irrigation sprinkler head?

Insert the plastic key end of the Hunter wrench into the adjustment socket . While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full 360° turn of the wrench will increase the arc 90°. Adjust to any arc between 40° and 360°.

What is the difference between red and blue Hunter nozzles?

The red nozzles have both higher and lower flow rates than what’s offered in the blue nozzles, but they deliver water very efficiently. The blue nozzles were developed as a result of our customers telling us that they didn’t like the “look” of the spray pattern on the red nozzles.

How do you adjust the radius on a sprinkler head?

To adjust the throw radius simply insert a fine-tip flat-head screwdriver into the metal screw (located at the center of the head). Rotate clockwise to decrease the radius, and counter-clockwise to increase the radius. 1. To adjust the arc simply twist the center collar (adjustable from 0 to 360 degrees).

Can you adjust sprinkler head distance?

Find the diffuser screw on the front of the sprinkler. Turn the screw to the right, or counterclockwise, using a screwdriver if necessary. The adjustment decreases the distance the sprinkler projects water.

How high should misters be?

The mist lines need to be placed at a precise height to be effective. Where possible, installation at or above 8′ is ideal, as the area will be cool without making patio furniture or people wet. However, systems installed too high create a pleasing, misty effect, but are ineffective in cooling the space.

How much water does a misting system use?

Because Koolfog misting systems use water for humidification, cooling and other forms of environmental control, we are often asked “how much water is actually used.” The simple answer is this: approximately one gallon of water per hour per nozzle using a standard misting nozzle.

Can you adjust MP Rotator without tool?

Please note, this tool is not required for adjustments. All adjustments can be made by hand. First, install the MP Rotator with the left edge indicator pointing to the left side of the desired watering pattern.

Article first time published on