Is timbor toxic to humans

Timbor is made from the element Borate, which is a natural occuring element in the earth. It is very safe and non-toxic.

Is Bora Care harmful to humans?

How toxic is Bora-Care to humans or pets? The active ingredient in Bora-Care, disodium octaborate tetrahydrate, is a borate salt compound that is formed from a union of boric acid and borax. It has a very low toxic level to humans and pets, but is very effective against insects and fungus.

What is a timbor treatment?

Timbor is an insecticide, fungicide and wood preservative for the protection and treatment of lumber against fungal decay and wood destroying insects (including termites, beetles, and carpenter ants). Timbor gets its preservative power from the active ingredient DOT (disodium octaborate tetrahydrate).

Can you use timbor on painted wood?

Yes, you can apply a solution of either Boracare or Timbor using a sprayer, brush, or roller. Keep in mind that Timbor will not dry completely smooth and clear, so if you are treating wood that is decorative or that will be finished with a stain or paint, then we recommend using Boracare for those applications.

Is timbor corrosive?

Timbor is non-corrosive, but will leave behind a white reside on certain finishes and glass. It is recommended that tarps be used to further help protect plants, and soil, when applying this product. Timbor is considered to be safe for humans, as it has a very low level of toxicity.

How long is BoraCare good for?

For registered pest control companies registered under the BoraShield program, Levels 1-3 cover product replacement, labor and damage repair up to $2500 for a period of 12 years. The mold protection in Levels 4 and 5 covers product replacement for 25 years.

How safe is BoraCare?

Is Boracare pet safe? Bora-Care is a very safe product and it is considered a green product as well. Typically, it takes about an hour for the surface of the wood to dry. After application has dried completely, it should be perfectly fine for children and pets to re-enter the house.

How do you mix Tim-Bor?

Mixing instructions Using a slightly oversized container/bucket, fill with water to about 80% of the final required volume. To prepare a 10% Tim-bor solution, add 1 lb Tim-bor powder per gallon of water, then add the remainder of the water, agitating until the Timbor has dissolved.

How long does timbor take to work?

It will be used to build furniture. Depending on thickness of the wood, Timbor can take up to 30 days or more to completely kill the insects inside the wood. However, it will only kill beetles that are active since Timbor kills the insects when they eat the wood, they ingest the Timbor at the same time.

How long does a timbor treatment last?

Tim-Bor is sprayed in attics and subarea where there is exposed wood. The protection offered can last between 10 and 20 years. It is approved for use against drywood termites, subterranean termites, dampwood termites, wood-boring beetles, and many kinds of wood destroying fungi.

Article first time published on

What does Tim-Bor do?

Tim-bor Professional is used for the control of carpenter ants, drywood termites, wood decay fungi and wood boring beetles. It is a water-soluble borate powder that can be applied as a dust, spray, foam or mist onto wood and cellulosic materials or inside wall voids, cracks and crevices.

Who makes Tim-Bor?

Active IngredientBoron sodium oxide (B8Na2O13), tetrahydrate (12280-03-4) 98%Shipping Weight1.67 lbsManufacturerNisusUPC616609111537

Is timbor flammable?

Tim-bor is a white, odorless, powdered substance that is not flammable, combustible, or explosive and has low acute oral and dermal toxicity. Large amounts of Tim-bor can be harmful to plants and other species. Therefore, releases to the environment should be minimized.

How do you use disodium Octaborate Tetrahydrate?

Disodium Octaborate Tetrahydrate (or DOT) is a white, odorless, powdered substance containing the basic elements of boron and oxygen, and is most often used in pest control products that are designed to target wood destroying insects such as termites, carpenter ants, and powderpost beetles.

Is Bora care toxic to dogs?

Dogs can exhibit signs of toxicity at approximately . 02 ounces of boric acid per pound of bodyweight. Borate, or sodium borate, is used in laundry detergent, cleaning products, and pesticides. If your dog ingests sufficient amounts of this ingredient, it can become toxic.

Can you paint over Bora care?

Boracare can be painted, sprayed, or foamed and will penetrate up to 4 inches into the wood but the wood will need to be sanded first and treated. The wood could be painted, stained and sealed after the product dries. If sealed, it will last for the life of the wood.

What is Boracide?

Jecta Diffusible Boracide is a ready to use borate that you inject in wood that acts as an insecticide or termiticide. It will protect wood from termites, powderpost beetles, carpenter ants, wood destroying beetles, and decay fungi with a high concentrate of 40% active disodium octaborate tetrahydrate.

How long does it take Bora-Care to work?

Answer: Bora-Care will take at least 30 days usually to diffuse through the entire piece of wood. This of course depends on the thickness and moisture content of the wood. It starts to work as soon as it begins to penetrate the wood it is applied to.

Does Bora-Care work on termites?

Bora-Care® is used for the interior and exterior control of subterranean termites, drywood termites, Formosan termites, wood destroying beetles and decay fungi. Perfect for wood pretreatments, Bora-Care® eliminates the wood as a food source for pests.

Is Bora-Care legal in California?

Answer: Yes, Bora-Care can ship to and be used in the state of California.

How long does Tim Bor last?

The manufacturer states that Timbor will last for the life of the wood as long as the wood is not exposed to rain or flooding. It will stay in the wood forever because of how it bonds to the cells of the wood.

How do you treat for termites?

Treating a termite infestation can be as easy as setting baits or as involved as digging a trench around your home to set up a termiticide barrier. The four main types of termite treatments include liquid-soil termiticides, termite baits, building materials with termiticides, and wood treatments.

What is the active ingredient in timbor?

The active ingredient in Tim-bor is DOT — Disodium Octaborate Tetrahydrate — a non-corrosive borate mineral salt that is deadly to drywood termites and other listed pests that will not break down over time.

What is cellulose debris under house?

Usually cellulose debris means that there are scraps of wood, sawdust, or bits of wood (possibly paper). It’s any kind of material made of wood. It could be old form board left in when the foundation was made. Most often, cellulose debris is mentioned as found in the crawl space of a home.

What is borate powder?

Summary: Borate (borax) is a mineral salt of boric acid and a very effective insecticide and wood preservative. It can be used as a powder, incorporated into baits, or applied to directly building materials.

How do you treat powder post beetles?

Fipro Foaming Aerosol will be used to treat active sites where Powder Post Beetles have burrowed into wood. Treat infested wood with Bora-Care which is a Borate salt-based treatment for wood. It helps to prevent further insect damage from wood-destoying insects like Powderpost Beetles.

Does Termidor work on drywood termites?

Termidor is a termiticide (an insecticide for termites). … Termidor can be utilized around the outside of a home (acting as a barrier, while killing off nearby colonies), and it can be utilized within a home to kill off current infestations. Termidor is effective against both drywood and subterranean termites.

How long does it take for Bora care to dry?

Allow floor to completely dry (typically 48 to 72 hours). Moisture content must be 10% or less before applying final finish. BORA-CARE® applications may raise the grain of the wood and an additional light sanding may be necessary before applying a new finish.

Is borate a metal?

A number of metal borates are known. They are produced by treating boric acid or boron oxides with metal oxides.

Is disodium Octaborate Tetrahydrate boric acid?

Disodium octaborate tetrahydrate, an alkaline salt, is produced in two forms. … This salt, which is commonly confused with boric acid, is used as an insecticide and is commonly sold in liquid or powder form.

How do you make disodium Octaborate Tetrahydrate?

The method comprises the steps: mixing 30-35 parts by weight of boric acid and 35-40 parts by weight of borax pentahydrate, then, adding 10-15 parts by weight of water, heating to the temperature of 110-130 DEG C for dissolving, and carrying out heat-preserved reaction for 40-60 minutes; carrying out solid-water …

You Might Also Like