Valvoline™ Type F is a high-quality automatic transmission fluid specifically engineered to protect and prolong the life of your automatic transmission vehicle. … Provides excellent resistance to fluid oxidation/breakdown at high temperatures. Approved for 1980 and earlier Ford, Lincoln and Mercury vehicles.
What is Type F transmission fluid for?
Valvoline™ Type F is a high-quality automatic transmission fluid specifically engineered to protect and prolong the life of your automatic transmission vehicle. … Provides excellent resistance to fluid oxidation/breakdown at high temperatures. Approved for 1980 and earlier Ford, Lincoln and Mercury vehicles.
Is Type F transmission fluid the same as ATF?
General Motors referred to its ATF as Dexron II and Ford’s specified fluid was labeled Mercon. Ford first produced its own ATF in 1967 and referred to as Type F. … This fluid was used in all Ford transmissions until 1977 and most Ford transmissions until 1980.
What is Type F transmission fluid equivalent?
This type of drive train fluid should not be used in automatics that require Type F. It can be replaced with Mercon or Mercon V specification.What is the difference between Type F and Dexron transmission fluid?
What is the difference between DEXRON® III/MERCON® and type F transmission fluid? The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package.
Is Type F fluid synthetic?
Lucas Semi-Synthetic Type F Automatic Transmission Fluid is blended from premium paraffinic and synthetic base oils (Groups II+ and Ill), with shear stable synthetic polymers and viscosity modifiers, combined with a high-quality additive package that includes anti-wear, anti-oxidants and corrosion inhibitors.
Can I use Type F transmission fluid?
RAY: If you put Dexron, Mercon or Chrysler 7176 transmission fluid in just about any transmission, it will perform just fine. … And in transmissions that are not designed for it, Type F fluid will cause rough shifts, and can even cause damage by making the torque converter engage before it should.
Can you use Type F transmission fluid in a Chevy?
Type “F” fluid is a heaver viscosity. Stands more heat also. Just the installation of type “F” fluid will have a firmer shift. You can not use it in a any of the GM overdrive transmissions.Can I mix Type F and Dexron?
As to ATF, no problem mixing Dexron and Type F, one can actually fine tune shift harshness as Type F is in fact “grippier”.
Is Dexron 3 compatible with Type F?Yes. A newer (in the last 40 years) rebuild of a C4 means it can use Dexron and work just fine. Some people like to use Type just because the antique service manuals say to. Some folks use Dexron and then a single quart of Type F for the additives.
Article first time published onDoes it matter what type of transmission fluid I use?
Some transmission fluids are very incompatible with different transmission types as they use different additives in the fluids. Your car transmission needs the correct fluid, as specified by your car manufacturer, to run correctly and to the fullest length of life.
Can you mix mercon with Type F transmission fluid?
It’s generally held that a quart or two of F and the rest of a C4 filled with Mercon works fine.
Can you use Type F transmission fluid in a Toyota?
Mobil Type F ATF is recommended by ExxonMobil for use in applications requiring Type F fluid as follows: Automatic transmissions in certain older Toyota, Mazda, Volvo, and other imported vehicles that require an ESW-M2C33-F fluid.
What can I use in place of Type A transmission fluid?
Dexron “B” fluid later replaced Type A, Suffix A. All iterations of Dexron B, Dexron II and Dexron III ATF products are backward compatible with Type A and Type A , Suffix A fluids.
Can you mix two types of transmission fluid?
No, we can’t mix different transmission fluids. Because each transmission fluid has different characteristics. Different transmission fluids are prepared considering various factors.
What kind of transmission fluid does a TH400 take?
It might appear that Dexron VI would therefore be backwards compatible as far back as the older TH350 and TH400 transmissions. The reality is that Dex VI is best only for newer vehicles.
What happens if you use the wrong automatic transmission fluid?
Automatic transmissions must only use the fluid specified by the automaker, such as General Motors’ Dexron series or Toyota’s Type T. Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission.
Can I use dexron 3 instead of ATF 4?
Fina’s product data sheet for its “Dexron-III/Mercon ATF” says it is recommended for “all late model GM…Chrysler and most imported car…automatic transmissions, as well as, (sic) those in Ford vehicles that call for a Mercon fluid.” But, again, a fluid compatible with Dexron III or Mercon is not going to be …
What is the fluid capacity of a TH350 transmission?
Transmission Fluid CapacityTransmission (w/ Stock Pan)# of QuartsGM TH3504GM TH4006GM Powerglide4
What is the difference between mercon and dexron?
Though similar to Dexron in its red color, there are a few differences chemically. Mercon has a different flash point from Dexron. Mercon has a flash point of 170 degrees Fahrenheit and a fire point of 185 degrees.
Should you use OEM transmission fluid?
The only time to use a Genuine fluid is if it’s still under warranty and you don’t have to pay for it. … These are exact same as Genuine fluid but are a much better value. If your car is more than 3 or 4 years old select an OEM part when the repair is not covered under warranty and you have to pay for it yourself.
Can I use CVT in ATF?
You cannot use any type of CVT fluid in a automatic transmission that requires ATF Transmission fluid. CVT transmission operates with a chain or belt and is very different in design versus a automatic transmission.
Are all CVT transmission fluids the same?
The fluid requirements for CVT transmissions are very different versus a typical stepped gear transmission. Each specific CVT fluid is formulated for a specific transmission; however, oil marketers have been able to demonstrate good performance with a single CVT oil across many different transmission designs.
Can you mix dexron 3 and dexron 6?
Dex 6 is fine to mix with Dex 3. Just do filter and replaced drained fluid. Dont forget to clean off magnet and put back.
What kind of fluid goes in a 4L60E?
ManufacturerTransmission TypeTransmission FluidCHEVROLET4L60EDEXRON IIIISUZU4L60EDEXRON IIIOLDSMOBILE4L60EDEXRON IIIPONTIAC4L60EDEXRON III
What is the viscosity of Type F transmission fluid?
Specific Gravity @ 60°F0.864Viscosity, KinematiccSt @ 40°C43cSt @ 100°C7.6Viscosity Index146
What kind of transmission fluid does Toyota use?
Genuine Toyota ATF – WS is Toyota’s “World Standard” automatic transmission fluid. Specifically formulated for use in Toyota sealed automatic transmissions. Provides optimum frictional performance and durability for consistently smooth shifting over the life of the transmission.
Which transmission fluid is best?
Our top pick for the best transmission fluid is the Castrol Transmax Dex/Merc ATF. It works for the majority of domestic cars out there and delivers great results. If you’re looking for something even more wallet-friendly, check out the ACDelco Dexron VI Synthetic ATF.
What weight oil is automatic transmission fluid?
Automatic Transmission Transmission Fluid is essentially thin hydraulic oil. In order to effectively lubricate the delicate parts of the system, the viscosity of the oil is kept low – generally around 0W/5 or 5W/10.
Is transmission fluid a petroleum product?
While traditional transmission fluid is made from crude oil and the reshaping of hydrocarbons for specifications of different vehicles, synthetic transmission fluid is created through different chemical reactions. This type of transmission oil is less likely to break down, oxidize or thin out in high temperatures.
Why is transmission fluid red?
Why Is Transmission Fluid Red? The red color for transmission fluid boils down to the applied dye at the point of manufacture. The reason is unknown but serves as a clue separating the fluid type from engine oil, radiator oil, washer fluid, and coolant.
