What is the biggest jon boat

SeaArk is well known for creating the World’s Largest Jon Boat in 1994 at 24 feet long and 72” wide. It has since upped the ante by creating a 26-foot jon boat. In addition to toting the title of World’s Largest Jon Boat, SeaArk Boats can also claim the title of the #1 Catfishing Boat.

What is the biggest size jon boat?

SeaArk is well known for creating the World’s Largest Jon Boat in 1994 at 24 feet long and 72” wide. It has since upped the ante by creating a 26-foot jon boat. In addition to toting the title of World’s Largest Jon Boat, SeaArk Boats can also claim the title of the #1 Catfishing Boat.

Do they make an 8 foot jon boat?

Jon boats will range in length from 8 foot to 20 foot if you buy from a manufacturer. If you were to build your own Jon boat (and people often do) then the length is entirely down to you. Jon boats are one of the easiest small fishing boats you can build, because the design is so simple.

What size do Jon boats come in?

Jon boats are available commercially between 8 and 24 feet (2.4 and 7.3 m) long and 32 to 60 inches (81 to 152 cm) wide, though custom sizes may be found. The simple design includes an open hull, without a bilge, leaving the ribs exposed.

What's the biggest motor you can put on a jon boat?

For Jon boats between 8 foot and 16 foot, 8 hp – 20 hp motors will offer more than enough power to push the boat upstream, achieve a respectable speed and get the boat on plane. 18 + foot Jon boats can usually take a 20 – 25 hp outboard motor.

How wide is a 12 ft Jon boat?

How wide is a 12-foot Jon boat? Around 48 to 60 inches on average.

How much weight can a 12 ft Jon boat hold?

As boat length increases the weight capacity similarly increase, so with a 12 foot boat approximately 400 lbs can be safely contained and at 14 foot 400+ lbs. At 16 foot in length a Jon boat can usually hold about 1,000 lbs. An 18 foot Jon boat will hold, on average, about 1,500 lbs.

How much is a 12 foot Jon boat worth?

The purchasing price of a Jon boat will depend on its make, size, construction material and the number of modifications made to the boat. A cheap 12 ft polythene Jon boat can be bought for as little as $550 while an 12 ft aluminum Jon boat can cost as much as $3000. High-end 21 ft Jon boats can cost as much as $30,000.

How wide is a 15ft Jon boat?

Length4.57 m15’Beam1.52 m5′Bottom Width1.07 m3′ 6”Max. Recommended HP25 HPMax. Person Capacity3 persons

What is a double wide Jon boat?

A double wide Jon boat, also called an extra wide Jon boat, is a flat bottom boat that has all the same features and functionality as a normal Jon boat but it has a wider beam.

Article first time published on

What does jon boat stand for?

Allegedly, the boats came to be known as jack boats but as time went on jack became John (John is a common variant to Jack) and people started calling them Ozark john boats. In later decades the name was modified to jon boat and it came to mean all flat bottomed boats.

What is a 1436 jon boat?

A 1436 Jon boat is a flat bottom, shallow draft watercraft used almost entirely on inland bodies of water. The 1436 number in the name refers to the length of the boat and the width of its bottom. A 1436 Jon boat is 14 foot long and has a bottom that is 36″ wide.

What sizes do aluminum boats come in?

10 foot Jon boat. Widths available: 48 inches. …
12 foot Jon boat. Widths available: Between 48 and 60 inches. …
14 foot Jon boat. Widths available: 48 – 60 inches. …
16 foot Jon boat. Widths available: Up to 78 inches. …
18 foot Jon boat. Widths: available 60 to 80 Inches width. …
20 + foot Jon boat. Widths available: 70+ inches.

What is Max HP for 14ft jon boat?

14′ Jon Boat Typical horsepower for a 14-foot jon boat would be between 15 HP and 20 HP although up to 25 HP is not uncommon either. 20 HP can comfortably give you a top speed of 20mph, potentially even stretching to 25mph depending on weather conditions and the weight on the boat.

What size motor is recommended for a 14 foot aluminum boat?

For lighter boats, a motor that produces 8-10 horsepower can get the job done quite easily. But if you’ve got a heavier boat, a 20-horsepower motor will get most any tinnie moving quickly.

How much horsepower does a 16 foot boat need?

To achieve maximum efficiency, you’ll have to give it 50 to 300 horsepower. There’s a range of the required power as you take into consideration the size and usage. An aluminum boat that is 16 feet long needs to have a 60 horsepower motor. Once equipped, it can have a speed of 25 to 30 miles per hour.

Will a jon boat sink?

Jon boats rarely flip but they can easily take on enough water to sink when they are not used correctly. Below are a few things you can do to ensure your Jon boat does not take on water. … Avoid overloading the boat. Ensure you distribute the load correctly.

Do Jon boats have titles?

Registration requirements vary from State to State though a common theme is that motorized Jon boats require registration (and sometimes titling) whereas non-motorized Jon boats do not require registration or titling.

Can you stand in a jon boat?

The jon boat flat bottom offers you stability when you stand. You could wrestle your catch as hard as possible and your boat will not tip over, provided the weight in your boat is well distributed. That said, use sound judgment when standing in one of these boats.

How deep are Jon boats?

Jon Boats are available in a range of sizes with typical common lengths around 12’2” (3.7 m), widths of 4’3” (1.3 m), depths of around 2′ (. 61 m). Jon Boats are flat-bottomed boats with two or three bench seats ideal for fishing, hunting, or civilian protection during floods.

What is the beam on a jon boat?

Beam. The beam of a boat is different from the width and you should not confuse the two. The beam is the widest point on the boat and can located anywhere along the hull. It is usually towards the rear on Jon boats or in the middle.

How heavy are Jon boats?

You can expect an average jon boat weight to be about 500 pounds (227 kg). Most jon boat trailers weigh about 400 pounds (181 kg). The average boat weight with trailer is approximately 900 pounds (408 kg).

How much does a 14 foot aluminum jon boat weight?

14-foot Jon boat 14-foot aluminum Jon boats have an average dry hull weight of 167 pounds or 76 kg. This average was calculated and based on the following models and manufactures.

What do you call a flat bottomed boat?

But what do you call a flat bottom boat? A flat bottom boat is often referred to as a shallow draft boat or sometimes as a shallow water boat. … Jon boats, scows, drift boats, flat bottom skiffs, dory boats, canal boats, narrowboats and rafts are common flat bottom boats.

How wide is a typical 20 foot boat?

The smaller boats on the market, in other words anything that’s less than 20 foot long tend to have a width of 8 foot. If you want to go even smaller, for example with a compact pontoon boat, which might be 12 feet in length, then the width will come down to around 7 feet.

What is a jon boat good for?

Jon boats are essentially flat-bottomed, utility boats. They are used for a variety of different tasks, from hunting to fishing to collecting lumber. Because of the flat shape of the hull, Jon boats tend to sit on top of the water as opposed to cruising through it.

How much does an aluminum boat cost?

Aluminum Multi-Species BoatBase Cost (boat, trailer and motor)Alumacraft Classic 165 CS$17,299Alumacraft Voyageur 175 Sport$23,399Crestliner 1750 Super Hawk$34,271Crestliner 1750 Fish Hawk$29,251

How much is a brand new jon boat?

From a few hundred to thousands of dollars for a new Jon Boat, the average price is $5,400.

How wide is a 16ft jon boat?

Jon boats sold commercially vary in width related to their length. 8-foot jon boats average 32 inches; 10-12 foot boats average 34-40 inches; 14-16 foot boats average 42-50 inches, and 18+ foot jon boats can be up to 60 inches wide.

How wide are river boats?

European varieties generally measure about 400 feet long and around 30 feet wide, not exceeding four decks tall. Usually accommodating under 200 guests, these common specifications limit river cruise lines to intimate vessels across the board.