Why is my Samsung top load washer not spinning

If your washer isn’t spinning properly , it could be because of an unbalanced load, which makes it harder for the drum to spin. An unblanced load also cause errors. “Ub” or “Ur” display is one of the sign that your washer is unbalanced. This may be because the washer is lopsided or because the load inside is uneven.

Why is my washing machine washing but not spinning?

Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.

How do I reset my Samsung top load washer?

Reset your washing machine What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.

How do I force my Samsung washer to spin?

Power the unit on.
Press and hold the spin key for approximately 3 seconds. A chime will sound.
Select the spin level, if desired.
Press the Start/Pause button.

Why does my Samsung washer not finish spin cycle?

The failure to complete the spin cycle can be caused by a slow drain and that code will appear. To correct the slow drain, open the bottom panel of the washer housing. You will see a plug on the lower right. Have some towels ready to catch a gush of water and remove the plug.

How dO you troubleshoot a Samsung washing machine?

Unplug the machine. …
Disconnect the hoses.
Remove the detergent drawer by pressing the central locking button.
Open the hatch of the drain filter at the bottom of the front panel.
Empty the water and clean the filter.
Put the washer on a side so that you can access the bottom.

Why won't my washing machine agitate or spin?

Common solutions for: My Washer Won’t Spin or Agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. … If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission.

How do I fix my Samsung 4C top load washer?

1 Check that the water tap connected to the washing machine is open to full.
2 Check that there are no kinks or bents in the water hose connected to the machine.
3 Check to see if the water hose mesh filter is not blocked. …
1 Turn off the water source to the washing machine.

How do I reset my Samsung washer to factory settings?

Step 1: Turn on the washing machine. You clearly simply need to press the power button to make it turn on.
Step 2: Press the option button. Next, press the option button on the machine for about 5 seconds. …
Step 3: Turn the dial to factory reset. …
Step 4: Tap to reset.

Why is my top loader not spinning?

If the belt mechanism is loose or slipped or the belt is damaged, it may not be spinning with enough force. If the belt is broken or fully off the rollers, then it won’t spin at all. A washer that won’t spin isn’t washing. If it can’t agitate clothes, then clothes don’t get clean.

Article first time published on

How do you fix a washer that won't spin dry?

Redistribute an off-balanced load of laundry. …
Level an off-kilter washer. …
Check the power source. …
Stop using an extension cord. …
Inspect the spin switch. …
Stick to high efficiency detergent with a front-load washer. …
Undo any kink in the hose. …
Track down a blockage in the drainage system.

Is there a reset button on a washing machine?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. … Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.

What does 4C mean?

What is Type 4C? The final hair type is 4C, which is similar to 4B in the way that the hair is densely packed. However, this type of hair experiences less definition and more shrinkage. Your strands will be so tightly coiled that they’re incredibly delicate.

What does 4C mean on Samsung?

4C or 4E is an error code which indicates that your washing machine has detected an issue with the water supply. This could mean that your Samsung washing machine is not able to generate a supply of water due to a blocked or kinked water supply hose.

How do I reset the code 4C on my Samsung washer?

If you have a top load washing machine that isn’t receiving enough water but is not showing a 4E or 4C error, you can add more water to it by using a different cycle. You can use the Deep wash or Deep fill cycles. Please contact Samsung Support to request service if the error still appears.

How do I reset washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.

How do I reset my washing machine motor?

Unplug the washer for 1 minute from the electrical outlet.
Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. …
The motor has now been reset and is ready for you to start a cycle.